At LocknCharge, we understand the importance of support. If you’re not satisfied, we’re not satisfied. Our purpose is to make life easier.

FUYL™ Cell Charging Locker


What do the Black and Red or Yellow Keys do?

The Black Key is a Master Key which allows access should the code be forgotten or emergency access needed. The Red Key or Yellow is a reprogramming key which should be kept safely and only used should a new Black Key need to be reprogrammed to the lock. For further details please contact us. See an instruction guide here for the keys.

When I open the FUYL cell with the Black Key does it reset the passcode?

No, the original code is still registered with the lock.

Do I need a Pedestal?

The Pedestal elevates the bottom FUYL Cell which is good for two reasons. 1) Should there be any leaks around the FUYL Cells, it will not affect the devices. 2) It reduces the distance to bend when reaching the bottom compartments of the FUYL Cell.

Do I need to purchase three FUYL Cells and a Pedestal to make a FUYL Cell Stack configuration?

Traditionally, your FUYL Cell Stack would consist of three FUYL Cells and a Pedestal, but this depends on how you wish to set it up. It is completely up to you. (Eg: some clients had a Stack configuration that consisted of two FUYL Cells and a Pedestal). We do not recommend you stack more than three FUYL Cells in a Stack configuration.

Where do I find my serial number?

You can find your serial number on the inside of the bottom cell.

I lost my red or yellow and black programming keys, what do I do?

Contact us and we can assist. 

I would like additional ventilation for my FUYL Cell, what are my options?

We have a FUYL Cell Fan Kit that can be purchased here for additional ventilation. Contact us for details.


FUYL Cell Instruction Manual

LocknCharge products are easy to set up. Download the instruction manual for more information. For further assistance please contact us.

Digilock Key Instruction Manual

Learn how to use the Digilock keys on the FUYL Cell.

FUYL Cell Stack - Setup Video Guide

The video below demonstrates how to setup a FUYL Cell Stack (3 FUYL Cells and a Pedestal). It also demonstrates how to route the cables through the FUYL Cells to the Pedestal. For more details refer to the downloadable PDF instruction manual.


Can't find what you're looking for?

Do you need to speak to someone regarding a warranty claim or technical support? Click the button below to fill in a short support email. We're here to help.

Submit a support email and we'll respond within 48 hours.

Submit a ticket